The unique Brooks Seal Free Pressure (SFP) transmitter provides excellent pressure measurement on high purity fluids. Unlike other high purity pressure transmitters, the SFP is constructed using a single piece perfluoroalkoxy (PFA) sensing chamber that does not use any seals. Because the only fluid-wetted surface is PFA, the possibility of fluid contamination is eliminated.
- No-seal design eliminates fluid contamination sources
- All PFA flow path
- Extremely strong sensor/PFA bond
- Versions available for UHP water, chemicals, acids, and bases
- Single-ended and flow-through versions available
- Integrated vapor leak indicator
- Not damaged by sub-atmospheric process conditions
- Temperature compensated output
SFP UHP Pressure TransmitterBrooks® Seal Free Pressure (SFP) transmitter is designed to measure the pressure of high purity fluids. It comes in two versions, the WA designation is for measuring ultrapure water and the CA designation is for measuring ultrapure chemicals, acids and bases.
The heart of the transmitter is an injection molded, single piece, pressure vessel fabricated from high purity Perfluoroalkoxy (PFA) plastic. The design allows the PFA diaphragm to be thick, while still providing pressure sensitivity and insuring process safety. The thick diaphragm virtually eliminates the possibility of corrosive ions diffusing from the process fluid. Injection molding provides a very smooth surface finish to maintain fluid purity. No elastomers are used to seal the pressure sensor from the process fluid. The benefit is increased fluid purity since elastomers can be a possible contamination source in ultrapure fluids. There are no potential fluid leak paths to the outside in this innovative design.
IPT122 2" Indicating Pressure Transmitters
With a variety of outputs available, the Brooks IPT122 series 2 inch stainless steel indicating pressure transmitters (IPT) are very versatile devices. Accurate within 1% of full scale, the IPT122 can provide 0 to 5 VDC, 1 to 5 VDC or 4 to 20 mA outputs with pressure ranges up to 4,000 psi. The IPT 122 is cleaned and double bagged in a Class 100 environment for ultimate high-purity.
| |
|
|
|
Temp |
|
|
| Model |
Type |
Full Scale Capacity |
Accuracy |
C |
F |
Output |
Power
Supply
|
|
SFP33WA
|
Flow Through -
Ultra Pure Water
|
0-15 psig
up to
0-150 psig
|
±1% FS
|
15-40 |
59-104 |
4-20 mA |
24 Vdc
|
| SFP33CA |
Flow Through -
Chemicals, Acids, Bases
|
0-15 psig
up to
0-150 psig |
±1% FS |
15-40 |
59-104 |
0-5V, 1-5V, 0-10V |
12-24 Vdc |
| SFP32WA |
Single Ended -
Ultra Pure Water |
0-15 psig
up to
0-150 psig |
±1% FS |
15-40 |
59-104 |
0-5V, 1-5V, 0-10V |
12-24 Vdc |
| SFP32CA |
Single Ended -
Chemicals, Acids, Bases |
0-15 psig
up to
0-150 psig |
±1% FS |
15-40 |
59-104 |
0-5V, 1-5V, 0-10V |
12-24 Vdc |
|
|
IPT122 2" Indicating
Pressure Transmitters
|
|
Vacuum to
4,000 psi
|
1% FS
|
|
|
|
|
|
